2N Helios IP User Manual

Configuration
3.3
62
Scheduler
The scheduler helps you set conditioned calling to user numbers. In case a user is not
present, 2N
®
Helios IP need not set up a call to his or her telephone number but can
automatically call other telephone numbers in the directory or the substitute number.
Each user number can be assigned a scheduler – profile. A total of 20 profiles can be
shared by the users (for Part Nos. 9137131(CK)E, 9137161(CK)E, 9137111(CK) this
number is 3, or 20 with a licence key only, Part No. 9137901). There are two possible
ways of profile validity condition setting: time setting in the Time schedule, or manual
setting of the profile activation and deactivation codes. For you to use both the
functions at the same time, the two conditions must be met at the same time.
Figure 3.16 Scheduler Set-up
General Settings
Profile name
Enter the scheduler profile name. This parameter is optional and helps you search
the list of profiles more easily.

2N Helios IP Specifications

General

Type	IP Intercom
Connectivity	Ethernet
Tamper Switch	Yes
Audio	Full duplex
Microphone	Built-in
Speaker	Built-in
Camera	Yes
Power Supply	PoE
Operating Temperature	+60°C
Ingress Protection	IP54
Protocols	SIP, RTSP, ONVIF
Audio Codec	G.711, G.722
Installation	Surface mount, flush mount (depending on model)