2N Helios IP User Manual

Display-Equipped 2N® Helios IP Control as Viewed by External User
4.2
106
The text string is retrieved on the current level and all sublevels of the telephone
directory. The count of contacts found is displayed on the top line. The first 3 (or 4)
found contacts are displayed in the central part of the window.
To browse through the contacts found and select the required one, push the quick
dialling button 6, thus recovering the arrow function of the numeric keypad.
Status Information
In addition to the above described modes, the 2N
®
Helios IP display indicates various
device statuses:
Call being set up
Ringing – outgoing call
Call connected
Call set-up failure
No response
Call terminated
Incoming call
Door opened/Unlocked

2N Helios IP Specifications

General

Type	IP Intercom
Connectivity	Ethernet
Tamper Switch	Yes
Audio	Full duplex
Microphone	Built-in
Speaker	Built-in
Camera	Yes
Power Supply	PoE
Operating Temperature	+60°C
Ingress Protection	IP54
Protocols	SIP, RTSP, ONVIF
Audio Codec	G.711, G.722
Installation	Surface mount, flush mount (depending on model)