2N Helios IP User Manual

Configuration
3.3
86
Automatic Update
TFTP server address
The IP address of the TFTP server where the firmware and configuration are
located that are to be automatically uploaded to 2N
®
Helios IP.
Update firmware
Enable/disable automatic firmware downloading from the TFTP server.
Update time
Set a period for automatic firmware downloading attempts from the TFTP server.
2N
®
Helios IP periodically (at a predefined time once a day) checks the TFTP
server for a later firmware version. Having found one, 2N
®
Helios IP updates the
firmware and restarts automatically. With this parameter you can choose the most
convenient time of a day for updating (when 2N
®
Helios IP is not very busy).
File prefix
Specify the TFTP firmware directory path or file prefix. 2N
®
Helios IP expects the
firmware file to be named Xiphelios_app.bin, where X is the prefix specified in this
parameter.
Update configuration
Enable or disable automatic configuration downloading from the TFTP server.
Update period
Set the time interval after which 2N
®
Helios IP gets connected to the TFTP server
for configuration file downloading.
File prefix
Specify the TFTP configuration directory path or file prefix. 2N
®
Helios IP expects
the configuration file to be named Xiphelios_config.ini, where X is the prefix
specified in this parameter.
Update display data
Enable/disable automatic display data/program updating from the TFTP server.
The display data are updated in the same time intervals together with the
configuration file.
File prefix
Specify the TFTP display data directory path or file prefix. 2N
®
Helios IP expects
the configuration file to be named Xiphelios_disp.bin, where X is the prefix
specified in this parameter.
Display
The 9137161KDE and 9137161CKDE 2N
®
Helios IP models are equipped with a colour
TFT display, which shows variable information such as digital name tags, telephone
directories, 2N
®
Helios IP statuses and/or user-defined images. You can set the basic
display parameters in this menu. For the display data uploading to 2N
®
Helios IP refer
to the Display Program.

2N Helios IP Specifications

General

Type	IP Intercom
Connectivity	Ethernet
Tamper Switch	Yes
Audio	Full duplex
Microphone	Built-in
Speaker	Built-in
Camera	Yes
Power Supply	PoE
Operating Temperature	+60°C
Ingress Protection	IP54
Protocols	SIP, RTSP, ONVIF
Audio Codec	G.711, G.722
Installation	Surface mount, flush mount (depending on model)