2N Helios IP User Manual

Configuration
3.3
95
Firmware
This menu is used for manual firmware updating.
Manual Firmware Update
Used for manual firmware updating using the configuration web interface. Use
the Browse button to select the new firmware file and push to upload it
to 2N
®
Helios IP. For automatic update refer to the
Auto Update subsection.
Figure 3.42 Firmware

2N Helios IP Specifications

General

Type	IP Intercom
Connectivity	Ethernet
Tamper Switch	Yes
Audio	Full duplex
Microphone	Built-in
Speaker	Built-in
Camera	Yes
Power Supply	PoE
Operating Temperature	+60°C
Ingress Protection	IP54
Protocols	SIP, RTSP, ONVIF
Audio Codec	G.711, G.722
Installation	Surface mount, flush mount (depending on model)