2N Helios IP - Administration Web Server

Configuration
3.3
72
Administration Web Server
This menu helps you configure the administration web server.
Web Server Settings
Web server
You can disable the administration web server launching. The change of this
parameter will not show until the next 2N
®
Helios IP restart. To enable the web
server, follow the instructions mentioned in the Web Server subsection.
Web server port
Set the web server communication port. The change of this parameter will not
show until the next 2N
®
Helios IP restart
Web server language
Set the default language after login to the web server.
Figure 3.21 Web Server Configuration