2N Helios IP User Manual

Configuration
3.3
92
Tools
This menu helps you set the 2N
®
Helios IP date and time manually and reboot the device.
Figure 3.39 Tools
Local Date and Time Setting
Used for date and time setting in case the NTP synchronisation is disabled (see the
Date and Time subsection). Push the button to synchronise the 2N
®
Helios IP
time with your PC time.
Reboot device
Used for device restarting in case of changes of some configuration parameters,
namely network settings, administration web interface settings and some SIP
configuration parameters.

2N Helios IP Specifications

General

Type	IP Intercom
Connectivity	Ethernet
Tamper Switch	Yes
Audio	Full duplex
Microphone	Built-in
Speaker	Built-in
Camera	Yes
Power Supply	PoE
Operating Temperature	+60°C
Ingress Protection	IP54
Protocols	SIP, RTSP, ONVIF
Audio Codec	G.711, G.722
Installation	Surface mount, flush mount (depending on model)