2N Helios IP User Manual

2N® Helios IP Components and Associated Products
1.2
14
9135332E
Surface 2-module roof
Dimensions
203×218×60 mm
(W×H×D)
9135352E
Wall mounting box
with 2-module frame
Dimensions
225×235×46 mm
(W×H×D)
Wall hole
210×220×50 ±5mm
9135362E
Wall mounting box
with 2-module roof
Roof dimensions
229×240×41 mm
(W×H×D)
Wall hole
210×220×50 ±5mm
The mounting accessories are made of stainless steel. For outdoor applications, the
use of the roof is required unless weather protection is provided otherwise. The box
with frame (without roof) allows for installation of 2N
®
Helios IP in indoor applications
so that the unit does not practically stick out (up to 1 mm).

2N Helios IP Specifications

General

Type	IP Intercom
Connectivity	Ethernet
Tamper Switch	Yes
Audio	Full duplex
Microphone	Built-in
Speaker	Built-in
Camera	Yes
Power Supply	PoE
Operating Temperature	+60°C
Ingress Protection	IP54
Protocols	SIP, RTSP, ONVIF
Audio Codec	G.711, G.722
Installation	Surface mount, flush mount (depending on model)