Network Settings
4-15 41-001343-02 REV05 – 07.2014
Configuration Server Download Precedence
An Administrator can set the phone’s download precedence to ignore DHCP, (only during the boot when the remote
configuration server is contacted) and use the following precedence instead:
To configure the download precedence, you use the option value (-1) as the value for the “dhcp config option override”
parameter in the configuration files. Setting this parameter to “-1” causes all DHCP configuration options to be ignored.
Configuring a Download Precedence Using the Configuration Files
Use the following procedure to configure the DHCP download precedence using the configuration files.
Aastra Web UI
1. Click on Advanced Settings->Network->Advanced Network Settings.
2. In the “DHCP Download Options” field, select an option to use to override the normal precedence order. Valid values are:
• Any (default) - no override - uses normal precedence order of 43, 160, 159, 66.
• Option 43
• Option 66
• Option 159
• Option 160
• Disabled (Ignores all DHCP configuration options (43, 66, 159, 160))
3. Click Save Settings to save your changes.
4. Click on Operation->Reset, and restart the phone for the changes to take affect.
1. Configuration URI,
2. DHCP, and then
3. Direct configuration.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “DHCP Option Settings” on pageA-12.
To Next Page
Loading...
