Aastra 6730I - Configurable Positioning of Programmed Softkeys; Shifting of Softkey Positions for Busy States

Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key Parameters
41-001343-02 REV05 – 07.2014 A-165
Configurable Positioning of Programmed Softkeys
Shifting of Softkey Positions for Busy States
Note:
Applicable to the 6867i IP Phone only.
Parameter –
collapsed softkey screen
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the 6867i from collapsing the softkeys to remove blank keys. When
enabled, the phone will remove all the softkeys defined as “None” and display the pro-
grammed softkeys in consecutive order. When disabled, the softkey will retain its pro-
grammed position. This parameter applies to both top and bottom softkeys.
Format Integer
Default Value 1 (Enabled)
Range 0-1
0 (Disabled)
1 (Enabled)
Example collapsed softkey screen: 0
Note:
Applicable to the 9480i, 9480i CT, 6735i, 6737i, 6755i, 6757i, 6757iCT, and 6867i IP Phones only.
Parameter –
collapsed context user softkey screen
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description When enabled, user configured softkeys on the applicable phones will collapse and fill in
any unused softkeys starting on the first page of softkeys during the following states:
• outgoing
• ringing
• connected
• hold
Format Boolean
Default Value 0
Range 0-1
0 (Disabled)
1 (Enabled)
Example collapsed context user softkey screen:1