Operational Features
41-001343-02 REV05 – 07.2014 5-32
Switching the 6867i IP Phone’s Home/Idle Screen Mode Using the Configuration Files
Use the following parameter to switch the 6867i IP phones home/idle screen mode.
Switching the 6867i IP Phone’s Home/Idle Screen Mode Using the IP Phone UI
Use the following procedure to switch the 6867i IP phones home/idle screen mode using the IP Phone UI.
6867i Screen Saver
A screen saver displaying the date and time and the number of missed calls (if applicable) is displayed for the 6867i IP
phone after a specified amount of inactivity.
The amount of time the phone must be idle before the screen saver initiates is configurable through the phone’s UI or by
defining the “screen save time” parameter in the configuration files.
Configuring the Screen Saver Timer Using the Configuration Files
Use the following parameter to configure the screen saver timer.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Configurable Home/Idle Screen Modes” on pageA-55.
IP Phone UI
1.
Press to enter the Options List.
2.
Navigate to the Display option and press the button or Select softkey.
3.
With Home Screen Mode highlighted press the
3 or 4 key to change to the desired mode.
4. Press the Save softkey to save your changes.
Note:
If there are no missed calls, only the date and time are displayed.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Screen Saver Settings” on pageA-55.
To Next Page
Loading...
