Operational, Basic, and Advanced Parameters
41-001343-02 REV05 – 07.2014 A-123
Switch Focus to Ringing Line
Call Hold Reminder Settings
Parameter –
switch focus to ringing line
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies whether or not the UI focus is switched to a ringing line while the phone is in
the connected state.
Format Boolean
Default Value 1 (enable)
Range 0 (disable)
1 (enable)
Example switch focus to ringing line: 1
Parameter –
call hold reminder
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the reminder ring splash timer to start as soon as you put a call on hold
(even when no other calls are active on the phone). When enabled, the phone initiates a
reminder ring splash periodically for the single call on hold. When disabled, no reminder
ring splash is audible.
Format Boolean
Default Value 0
Range 0 (disable)
1 (enable)
Example call hold reminder: 1
Parameter –
call hold reminder during active calls
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the ability for the phone to initiate a continuous reminder tone on
the active call when another call is on hold. For example, when the call on Line 1 is on
hold, and the User answers a call on Line 2 and stays on that line, a reminder tone is
played in the active audio path on Line 2 to remind the User that there is still a call on
hold on Line 1.
When this feature is disabled, a ring splash is heard when the active call hangs up and
there is still a call on hold.
Format Boolean
Default Value 0
Range 0 (disable)
1 (enable)
Example call hold reminder during active calls: 1
To Next Page
Loading...
