Aastra 6730I - Ring Tones and Tone Sets

Operational Features
5-89 41-001343-02 REV05 – 07.2014
Ring Tones and Tone Sets
You can configure ring tones and ring tone sets on the IP phones.
Ring Tones
There are several distinct ring tones a user or administrator can select from to set on the IP phones. You can enable/disa-
ble these ring tones on a global basis or on a per-line basis.
The following table identifies the valid settings and default values for each type of configuration method.
Ring Tone Settings Table
Configuration Method Valid Values Default Value
Configuration Files Global:
0 (Tone1)
1 (Tone 2)
2 (Tone 3)
3 (Tone 4)
4 (Tone 5)
5 (Tone 6)
6 (Tone 7)
7 (Tone 8)
8 (Tone 9)
9 (Tone 10)
10 (Tone 11)
11 (Tone 12)
12 (Tone 13)
13 (Tone 14)
14 (Tone 15)
15 (Silence)
Per-Line:
-1 (global)
0 (Tone1)
1 (Tone 2)
2 (Tone 3)
3 (Tone 4)
4 (Tone 5)
5 (Tone 6)
6 (Tone 7)
7 (Tone 8)
8 (Tone 9)
9 (Tone 10)
10 (Tone 11)
11 (Tone 12)
12 (Tone 13)
13 (Tone 14)
14 (Tone 15)
15 (Silence)
Global:
0 (tone 1)
Per-Line:
-1 (global)