Aastra 6730I - 802.1 X Support Settings

Operational, Basic, and Advanced Parameters
A-94 41-001343-02 REV05 – 07.2014
802.1x Support Settings
Use the following parameters to configure the 802.1x Protocol on your phone using the configuration files.
For EAP-MD5 use:
• eap type
• identity
• md5 password
• pc port passthrough enabled
For EAP-TLS use:
• eap type
• identity
• 802.1x root and intermediate certificates
(use 1 root and 0 or 1 intermediate certificates)
• 802.1x local certificate
(use 1 local certificate)
• 802.1x private key
(1 private key that corresponds to local certificate)
• 802.1x trusted certificates
(0 or more trusted certificates (a maximum of 2))
• pc port passthrough enabled
Parameter –
pc port passthru enabled
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the PC port.
Format Integer
Default Value 1 (enable)
Range 0 (disable)
1 (enable)
Example pc port passthru enabled: 1
Parameter –
eap type
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the type of authentication to use on the IP Phone.
Format Integer
Default Value 0 (disable)
Range 0 (disable)
1 (MD5)
2 (TLS)
Example eap type: 1