Operational, Basic, and Advanced Parameters
A-132 41-001343-02 REV05 – 07.2014
Bellcore Cadence Settings
Parameter –
alert priority
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description When an "alert priority" keyword appears in the header of the INVITE request, the configured
Bellcore ring tone is applied to the IP phone.
Format Integer
Default Value 0 Normal ringing
Range 0 Normal ringing (default)
1 Bellcore-dr2
2 Bellcore-dr3
3 Bellcore-dr4
4 Bellcore-dr5
5 Silent
Example alert priority: 4
Parameter–
bellcore cadence dr2
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Sets the cadence for Bellcore-dr2.
Note:
You can define up to 8 cadence rings. The value of -1 indicates “do not repeat”.
Format Integer
Default Value 800,400, 800,4000
Range Not Applicable
Example bellcore cadence dr2: 800, 400, 800, 4000
Parameter–
bellcore cadence dr3
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Sets the cadence for Bellcore-dr3.
Note:
You can define up to 8 cadence rings. The value of -1 indicates “do not repeat”.
Format Integer
Default Value 400,200,400,200,800,4000
Range Not Applicable
Example bellcore cadence dr3: 400,200,400,200,800,4000
To Next Page
Loading...
