Advanced Operational Parameters
41-001343-02 REV05 – 07.2014 A-221
SIP Services/RTCP Summary Reports Transport Protocol Settings
SIP Services
Parameter –
sip services transport protocol
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the transport protocol used for SIP services.
By default, this parameter is set to -1 (invalid) whereby SIP services use the same
transport protocol as defined in the “sip transport protocol” parameter.
Format Numeric
Default Value -1 (Invalid)
Range -1 (Invalid)
0 (TCP/UDP)
1 (UDP)
2 (TCP)
Example sip services transport protocol: 1
Parameter –
sip services port
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the port used for SIP services.
Format Numeric
Default Value 5060
Range Greater than 1024 and less than 65535
Example sip services port: 7300
To Next Page
Loading...
