Operational, Basic, and Advanced Parameters
A-154 41-001343-02 REV05 – 07.2014
Send DTMF for Remapping Conference or Redial Key
Parameter –
map redial key to
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Sets the Redial key as a Speeddial key if a value is entered for this parameter. If you leave
this parameter blank, the Redial key returns to its original functionality.
Note:
If you configure the Redial key for speeddialing on the 6757i CT Base Station, the Redial
key on the 6757i CT handset retains its original functionality. The Redial key on the hand-
set is not configured for speeddial.
Format Integer
Default Value Not Applicable
Range Not Applicable
Example map redial key to: 5551234
Parameter –
map conf key to
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Sets the Conf key as a Speeddial key if a value is entered for this parameter. If you leave this
parameter blank, the Conf key returns to its original functionality.
Note:
If you configure the Conf key for speeddialing on the 6757i CT Base Station, the Conf key
on the 6757i CT handset retains its original functionality. The Conf key on the handset is
not configured for speeddial.
Format Integer
Default Value Not Applicable
Range Not Applicable
Example map conf key to: 5551267
Parameter–
map redial as dtmf
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Allows the phone to send the stored number as DTMF using the phone configured DTMF
method when the “Redial” key is pressed.
Format Boolean
Default Value 0
Range 0-1
0 (Disabled)
1 (Enabled)
Example map redial as dtmf:1
To Next Page
Loading...
