Aastra 6730I - Mapping Key Settings

Operational, Basic, and Advanced Parameters
41-001343-02 REV05 – 07.2014 A-153
Mapping Key Settings
This section provides the hard key settings you can use to enable and disable the Redial, Conf, and Xfer keys on the IP
phone.
Parameter –
redial disabled
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the Redial key on the IP phone. If this parameter is set to 0, the key is
active and can be pressed by the user. If this parameter is set to 1, pressing the Redial key
is ignored, and the dialed number is not saved to the "Redial List".
Format Boolean
Default Value 0 (false)
Range 0 (false), 1 (true)
Example redial disabled: 1
Parameter –
conference disabled
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the Conf key on the IP phone. If this parameter is set to 0, the key is
active and can be pressed by the user. If this parameter is set to 1, pressing the Conf key is
ignored.
Format Boolean
Default Value 0 (false)
Range 0 (false), 1 (true)
Example conference disabled: 1
Parameter –
call transfer disabled
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the Xfer key on the IP phone. If this parameter is set to 0, the key is
active and can be pressed by the user. If this parameter is set to 1, pressing the Xfer key is
ignored.
Format Boolean
Default Value 0 (false)
Range 0 (false), 1 (true)
Example call transfer disabled: 1