Aastra 6730I - User Dial Plan Setting; Aastra Web UI Settings; Configuration Server Settings

Operational, Basic, and Advanced Parameters
A-16 41-001343-02 REV05 – 07.2014
User Dial Plan Setting
Aastra Web UI Settings
Configuration Server Settings
Parameter –
sip user parameter dial plan
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The dial plan that the network uses to distinguish between a real PSTN number and a
number that looks like a PSTN number but is actually on an IP network.
Note:
You can configure the “sip user parameter dial plan” parameter on a global basis only. If it
is misconfigured, then the parameter is ignored. Entering no value disables this feature.
Format Alpha-numeric characters
Default Value Blank
Range Up to 512 characters (more than 512 characters disables this parameter).
Example sip user parameter dial plan: 6xx | 8xxxx |9xxxxxxx
Parameter –
web interface enabled
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the Aastra Web UI interface for a single IP phone when this parameter
is entered in the <mac>.cfg file.
Enables or disables the Aastra Web UI interface for all phones when this parameter is
placed in the aastra.cfg file.
Format Integer
Default Value 1 (admin/user enabled)
Range 0 (admin/user disabled)
1 (admin/user enabled)
2 (only admin enabled)
Example web interface enabled: 1
Parameter –
download protocol
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Protocol to use for downloading new versions of software to the IP phone.
Format Text
Default Value TFTP
Range TFTP
FTP
HTTP
HTTPS
Example download protocol: HTTPS