Aastra 6730I - Centralized Conferencing Settings

To Next Page

To Previous Page

Operational, Basic, and Advanced Parameters

41-001343-02 REV05 – 07.2014 A-79

Centralized Conferencing Settings

Global Setting

Per-Line Setting

Parameter –

sip centralized conf

Configuration Files

aastra.cfg, <model>.cfg, <mac>.cfg

Description Globally enables or disables SIP centralized conferencing for an IP phone as follows:

• To disable centralized conferencing, leave this field empty (blank).

• To enable SIP centralized conferencing, then do one of the following actions:

– If you have specified a proxy server/registrar server, then to reach the media

server via the proxy server, set this field to one of the following:

conf (Sylantro server), or

Conference (BroadSoft server)

By setting this field to conf, you specify conf@<proxy_server _address>:

<proxy_port>. For example, if the proxy server address is 206.229.26.60 and the

proxy port used is 10060, then by setting this parameter to conf, you are specify-

ing the following: conf@206.229.26.60:10060

– To reach the media server using a different address/port than that specified by

the proxy, set this field to the following:

conf@<media_server _address>: <media_port>

Format String

Default Value Blank

Example sip centralized conf: conf

Parameter –

sip lineN centralized conf

(N is a line number from 1 to 9)

Configuration Files

aastra.cfg, <model>.cfg, <mac>.cfg

Description Enable or disable per-line SIP centralized conferencing for an IP phone as follows:

• To disable centralized conferencing, leave this field empty (blank).

• To enable SIP centralized conferencing on a specific line, do one of the following

actions: