Aastra 6730I - Language Settings

Operational, Basic, and Advanced Parameters
41-001343-02 REV05 – 07.2014 A-135
Language Settings
Parameter –
language
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The language you want to display for the IP Phone UI.
Valid values for all phones are:
0 (English) default
1-4
The values 1-4 are dependent on the “Language N” parameter. For example, if “lan-
guage 1: lang_fr.txt”, then “language: 1” would set the IP phone UI language to French.
Valid values for CT cordless handsets are:
0 (English)
1-2
Notes:
• Values 1-2 can only be set to either French or Spanish.
• All languages may not be available for selection. The available languages are depend-
ant on the language packs currently loaded to the IP phone. For more information
about loading language packs, see “Loading Language Packs” on page5-40.
Format Integer
Default Value 0
Range 0 to 4 (all phones)
0 to 2 (for CT handsets)
Example language: 1
Parameter –
web language
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The language you want to display for the IP Phone UI and the Aastra Web UI.
Valid values for all phones are:
0 (English) default
1-4
The values 1-4 are dependent on the “Language N” parameter. For example, if “lan-
guage 1: lang_fr.txt”, then “language: 1” would set the webpage language to French.
Notes:
• All languages may not be available for selection. The available languages are depend-
ant on the language packs currently loaded to the IP phone. For more information
about loading language packs, see “Loading Language Packs” on page5-40.
Format Integer
Default Value 0
Range 0 to 4
Example language: 1