Aastra 6730I - Press-And-Hold Speeddial Keypad Key Settings

Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key
A-176 41-001343-02 REV05 – 07.2014
Press-and-Hold Speeddial Keypad Key Settings
Parameter –
topsoftkeyN line
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description This is the line associated with the softkey you are configuring. The number of applicable
lines available is dependent on the specific IP phone model.
The “topsoftkeyN line” parameter can be set for the following softkey types only:
• speeddial
• blf
• list
• acd
• dcp
• lcr
• blfxfer
• speeddialxfer
• speeddialconf
• speeddialmwi
• redial
• filter
Format Integer
Default Value 1
Range 1 through 9
Example topsoftkey1 line: 1
topsoftkey2 line: 5
Parameter –
pnhkeypadN value
(where N corresponds to the key-
pad keys 1-9)
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The speeddial number that is dialed out when you press and hold the corresponding key-
pad key.
Format Integer
Default Value N/A
Range N/A
Example pnhkeypad7 value: 5557605123
Parameter –
pnhkeypadN line
(where N corresponds to the key-
pad keys 1-9)
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The line associated with the press and hold speeddial number configured on the keypad
key.
Format Integer
Default Value 1
Range 1 through 9
Example pnhkeypad7 line: 2