Network Settings
4-23 41-001343-02 REV05 – 07.2014
For the 6867i:
1.
Press on the phone to enter the Options List.
2. Press the Advanced softkey.
3. Enter the Administrator password using the keypad. Default is “22222”.
4. Select Network > Ethernet Ports.
5. With LAN Port highlighted, press the right navigation key and select a negotiation method to use on port 0. Valid values are:
• AutoNegotiation
• Full 10Mbps
• Full 100Mbps
• Full 1000Mbps
• Half 10Mbps
• Half 100Mbps
• Half 1000Mbps
Default is AutoNegotiation.
6. Press the left navigation key and press down to highlight PC Port.
7. Select a negotiation method to use on port 1. Valid values are:
• AutoNegotiation
• Full 10Mbps
• Full 100Mbps
• Full 1000Mbps
• Half 10Mbps
• Half 100Mbps
• Half 1000Mbps
Default is AutoNegotiation.
8. Press the Save softkey.
9. Restart the phone for the selection to take affect.
IP Phone UI
To Next Page
Loading...
