Aastra 6730I - Page 181

Network Settings
41-001343-02 REV05 – 07.2014 4-34
IP Phone UI
1.
Press on the phone to enter the Options List.
2. Select Administrator Menu.
3. Enter your Administrator password.
Note:
The IP Phones accept numeric passwords only.
4. Select Configuration Server.
5. Select HTTPS Settings.
Configure HTTPS Client
6. Select HTTPS Client.
7. Select Client Method.
8. Press Change to select a client method to use for HTTPS. Valid values are:
• SSL 3.0 (default)
• TLS 1.0
9. Press Done to save the changes.
Configure HTTPS Server
10. Select HTTPS Server.
11. Select HTTP->HTTPS.
12. Press Change to select “Ye s ” or “No”. D e fa ul t i s “ No”.
Enabling this feature redirects the HTTP protocol to HTTPS.
13. Press Done to save the changes.
14. Select XML HTTP POSTs.
15. Press Change to select “Ye s ” or “No”. D e fa ul t i s “ No”.
Enabling this feature blocks XML HTTP POSTs from the IP Phone.
16. Press Done (4 times) to finish.
Note:
The session prompts you to restart the IP phone to apply the configuration settings.
17. Select Restart.