Network Settings
4-51 41-001343-02 REV05 – 07.2014
To set VLAN ID and priority for the LAN Port (Port 0):
5. Enter a VLAN ID value from 1 to 4095 in the VLAN ID field. Default is 1.
Note:
Setting the LAN Port VLAN ID to 4095 and PC Port VLAN ID to any ID from 1 to 4094 will allow frames from the PC port (containing a VLAN
ID) to be untagged before being forwarded to the LAN port and frames from the LAN port (without a VLAN ID) to be tagged with the con-
figured VLAN ID before being forwarded to the PC port.
Example:
You enable tagging on the phone port as normal but set the LAN Port VLAN ID to 4095 and the PC Port VLAN ID to any ID from 1 to 4094. The
following example sets the PC port to be on VLAN 3 but the LAN port is configured as untagged.
6. Choose a VLAN Protocol (SIP Priority, RTP Priority, and/or RTCP Priority), and select a priority for the associated Protocol. Valid values are
0 to 7, Defaults are as follows:
• SIP Priority = 3
• RTP Priority = 5
• RTCP Priority = 5
Aastra Web UI
To Next Page
Loading...
