Aastra 6730I - Page 258

Operational Features
5-17 41-001343-02 REV05 – 07.2014
Example 1
The following is an example of a custom time zone configuration in the configuration files using relative time (for EST):
time zone name: Custom
dst [start|end] relative date: 1 #relative
time zone minutes: 300
dst minutes: 60
dst start week The week in the specified month in which DST starts. Valid
value is a positive or negative integer from 1 to 5.
1 = first full week of month
-1 = last occurrence "dst start day" in the month
2 = second full week of month
-2 =second last occurrence "dst start day" in the month
.
.
.
5 = fifth full week of month
-5 = fifth last occurrence "dst start day" in the month
dst start week: 2
dst end week The week in the specified month in which DST ends. Valid
value is a positive or negative integer from 1 to 5.
1 = first full week of month
-1 = last occurrence "dst start day" in the month
2 = second full week of month
-2 =second last occurrence "dst start day" in the month
.
.
.
5 = fifth full week of month
-5 = fifth last occurrence "dst start day" in the month
dst end week: -1
dst start day The day of the specified week in the specified month that
DST starts on. Valid values are an integer from 1 to 7.
1 = Sunday
2 = Monday
.
.
.
7 = Saturday
dst start day: 2
dst end day The day of the specified week in the specified month that
DST ends on. Valid values are an integer from 1 to 7.
1 = Sunday
2 = Monday
.
.
.
7 = Saturday
dst end day: 7
dst start hour The hour that DST starts. Valid values are an integer from 0
(midnight) to 23.
dst start hour: 10
dst end hour The hour that DST ends. Valid values are an integer from 0
(midnight) to 23.
dst end hour: 23
Custom Configuration
File Parameter Description Example