Aastra 6730I - Page 427

Operational Features
41-001343-02 REV05 – 07.2014 5-186
Configuring Park/Pickup Static Configuration Using the Aastra Web UI
Park/Pickup Programmable Configuration (Using a Softkey)
The programmable method of configuration creates park and pickup keys (softkeys, programmable keys, expansion mod-
ule keys) that you can configure on the IP phones.
For all 8/11-Line LCD phones and the 6739i and 6867i phones you can set a key as "Park" or "Pickup" and then:
• specify a customized label to display on the Phone UI
• specify the state of the park and/or pickup keys
For 3-Line LCD display phones, you can set a programmable key as "Park" or "Pickup".
Aastra Web UI
For 8 and 11-Line LCD Phones
1. Click on Basic Settings ->Preferences ->General
2. Enter a server value in the Park Call field to which incoming live calls will be parked.
Note:
For values to enter in this field, see the table “Park/Pickup Call Server Configuration Values” on page5-185.
3. Enter a server value in the Pick Up Parked Call field.
4. Click Save Settings to save your changes.