Operational Features
5-243 41-001343-02 REV05 – 07.2014
For example:
sip line1 vmail: *97
sip line2 vmail: *95
Use the following procedure to configure voicemail using the configuration files.
Using Voicemail
Use the following procedure to access and use voicemail.
From a selected item in the Voicemail list, you can also lift the handset (go offhook) to make an outgoing call using the
voicemail access phone number.
Note:
In the above example, the user would dial *97 to access the voicemail account for line 1, and *95 to access the voicemail
account for line 2.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Voicemail Settings” on pageA-105.
IP Phone UI
1. Press Services on the phone to display the Services menu.
2. From the Services menu, select "Voicemail".
3.
Use the
5 and 2 to scroll through the line items in the Voicemail List.
4.
When you have selected a line item, press the key,
4 key, or press a line softkey to make an outgoing call using the voicemail
access phone number associated with the line for which the voicemail account is registered.
From a selected item in the Voicemail list, you can also lift the handset (go offhook) to make an outgoing call using the voicemail access
phone number.
For the 6739i:
1.
Press the Key or the icon on the phone.
2. Using your finger, scroll through the line items in the Voicemail list.
3.
When you have selected a line item, press the Key, or press a line/call appearance key to make an outgoing call using the voicemail
access phone number associated with the line for which the voicemail account is registered.
Note:
You can also access your Voicemail via the “Services” Key on your phone if this has been setup by your System Admin-
istrator.
To Next Page
Loading...
