Operational Features
41-001343-02 REV05 – 07.2014 5-250
Example Configuration of XML Application
The following example shows the parameters you enter in the configuration files to configure an XML application:
xml application URI: http://172.16.96.63/aastra/internet.php
xml application title: Aastra Telecom
xml application post list: 10.50.10.53, dhcp10-53.ana.aastra.com
Configuring for XML on the IP Phone
After creating an XML application, an administrator can configure the IP phone to use the application using the configura-
tion files or the Aastra Web UI.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “XML Settings” on pageA-114.
Aastra Web UI
For 8 and 11-Line LCD phones:
1. Click on Operation->Softkeys and XML.
2. Select a key from keys 1 through 20.
3. In the "Type" field, select XML from the list box.
4. In the "Label" field, enter a label that displays on the IP phone for the softkey. For example, "XML".
5. In the "Value" field, enter the IP address or qualified domain name of the XML application.
To Next Page
Loading...
