Advanced Operational Features
6-24 41-001343-02 REV05 – 07.2014
Configuring the 802.1x Protocol Using the Aastra Web UI
Use the following procedure to configure the 802.1x Protocol on your phone using the Aastra Web UI.
9. Press the Save softkey.
10. Restart the phone for the selection to take affect.
Aastra Web UI
1. Click on Advanced Settings->802.1x Support.
To configure EAP-MD5:
2. In the “EAP Type” field, select EAP-MD5.
Valid values are: Disabled (Default), EAP-MD5, and EAP-TLS.
3. In the “Identify” field, enter an Identity for the IP phone for which you are configuring 802.1x.
For example, phone1.
4. In the “MD5 Password” field, enter a password used for the MD5 authentication of the phone.
For example, password1.
5. Click Save Settings to save your changes.
To configure EAP-TLS:
1. Click on Advanced Settings->802.1x Support.
1. In the “EAP Type” field, select EAP-TLS.
Valid values are: Disabled (Default), EAP-MD5, and EAP-TLS.
2. In the “Identity” field, enter an Identity for the IP phone for which you are configuring 802.1x.
For example, phone1.
IP Phone UI
To Next Page
Loading...
