Aastra 6730I - Page 617

Operational, Basic, and Advanced Parameters
41-001343-02 REV05 – 07.2014 A-11
Parameter –
ethernet port 1
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The send (TX) and receive (RX) method to use on Ethernet port 1 to transmit and
receive data over the LAN.
Note:
PC Port parameters are not applicable to the 6730i IP Phone.
Format Integer
Default Value 0
Range 0 - Auto Negotiate
1 - Full Duplex, 10Mbps
2 - Full Duplex, 100Mbps
3 - Full Duplex, 1000Mbps (applicable for the 6739i, 6735i, 6737, 6865i, and 6867i IP
phones only)
4 - Half Duplex, 10Mbps
5 - Half Duplex, 100Mbps
6 - Half Duplex, 1000Mbps (applicable for the 6739i, 6735i, 6737, 6865i, and 6867i IP
phones only)
Example ethernet port 1: 2
Parameter –
pc port passthru enabled
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the PC port.
Note:
PC Port parameters are not applicable to the 6730i IP Phone.
Format Integer
Default Value 1 (enable)
Range 0 (disable)
1 (enable)
Example pc port passthru enabled: 1