Aastra 6730I - Page 635

Operational, Basic, and Advanced Parameters
41-001343-02 REV05 – 07.2014 A-29
Parameter –
sip turn port
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Port number of the TURN server (also known as Traversal Using Relay NAT).
Note:
The NAT IP configuration parameter takes precedence over the STUN and TURN
parameters.
Format Integer
Default Value 3479
Range 0-65535 (One (1) or two (2) port numbers separated by a comma)
Note:
The first is the primary and the second is the backup.
Example sip turn port: 3479,3480
Parameter –
sip turn user
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Username that a user must enter when accessing an account on the TURN server.
Note:
The NAT IP configuration parameter takes precedence over the STUN and TURN
parameters.
Format Alphanumeric characters
Default Value Not Applicable
Range Up to 63 alphanumeric characters
Example sip turn user: 0412919146
Parameter –
sip turn pasx
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Password that a user must enter when accessing an account on the TURN server.
Note:
The NAT IP configuration parameter takes precedence over the STUN and TURN
parameters.
Format Alphanumeric characters
Default Value Not Applicable
Range Up to 63 alphanumeric characters
Example sip turn pass: 42447208233b8b8b8a234