Aastra 6730I - Page 681

Operational, Basic, and Advanced Parameters
41-001343-02 REV05 – 07.2014 A-75
Parameter –
sip lineN outbound proxy port
(N is a line number from 1 to 9)
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The proxy port on the proxy server to which the IP phone sends all SIP messages.
Format Integer
Default Value 0
Range Not Applicable
Example sip outbound proxy port: 5060
Parameter –
sip lineN registrar ip
(N is a line number from 1 to 9)
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The address of the registrar for which the IP phone uses to send REGISTER requests.
A SIP registrar is a server that maintains the location information of the IP phone.
A global value of 0.0.0.0 disables registration. However, the phone is still active and you
can dial using username@ip address of the phone.
If the Registrar IP address is set to 0.0.0.0 for a per-line basis (i.e, line 1, line 2, etc.), then
the register request is not sent, the "No Service" message does not display, and the mes-
sage waiting indicator (MWI) does not come on.
Format IP address or fully qualified Domain Name
Default Value 0.0.0.0
Range Not Applicable
Example sip line1 registrar ip: 192.168.0.101
Parameter –
sip lineN registrar port
(N is a line number from 1 to 9)
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The registrar's port number
Format Integer
Default Value 0
Range Not Applicable
Example sip line1 registrar port: 5060