Aastra 6730I - Page 719

Operational, Basic, and Advanced Parameters
41-001343-02 REV05 – 07.2014 A-113
Parameter–
use lldp elin
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the use of an Emergency Location Identification Number (ELIN) received
from LLDP as a caller ID for emergency numbers.
Format Boolean
Default Value 1 (enabled)
Range 0 (disabled)
1 (enabled)
Example use lldp elin: 0
Parameter–
lldp startinterval
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Aastra IP Phones have a 32 second time-out interval for listening to LLDP-MED responses
when the phone is booting up. If LLDP-MED responses are received after this initial listening
period, the phone will ignore the response. This "lldp startinterval" parameter can be used to
configure the time-out interval. This parameter is only valid during the phone bootup proc-
ess.
Format Integer
Default Value 32 (seconds)
Range 0- 65535 (seconds)
Example lldp startinterval: 7
Parameter–
lldp optional inventory manage-
ment tlv
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Implements either all of the LLDP-MED Inventory Management TLV sets or none of the sets.
Format Integer
Default Value 1 (send all LLDP-MED Inventory Management TLV sets)
Range 0-1
0 (do not send any LLDP-MED Inventory Management TLV sets)
1 (send all LLDP-MED Inventory Management TLV sets)
Example lldp optional inventory management tlv: 0