ABB ACH480 - Page 260

Def /
FbEq16/32
DescriptionName/ValueNo.
NoneActivates (and specifies the type of) I/O extension
module.
Extension
module type
15.01
5External relay option BREL-01.BREL
NoneI/O extension module detected on the drive.Detected
extension
module
15.02
5External relay option BREL-01.BREL
1 = 1Displays the status of the relay outputs. This
parameter is read-only.
RO status15.04
-1 = Relay output 4 is ON.Bit 0 RO4
-1 = Relay output 5 is ON.Bit 1 RO5
-1 = Relay output 6 is ON.Bit 2 RO6
-1 = Relay output 7 is ON.Bit 3 RO7
1 = 1The electrical statuses of the relay/digital outputs
can be overridden for e.g. testing purposes. A bit in
parameter 15.06 RO forced data is provided for each
relay or digital output, and its value is applied
whenever the corresponding bit in this parameter
is 1.
RO force
selection
15.05
-1 = Force relay output 4 to value of bit 0 of
parameter 15.06 RO forced data.
Bit 0 RO4
-1 = Force relay output 5 to value of bit 0 of
parameter 15.06 RO forced data.
Bit 1 RO5
-1 = Force relay output 6 to value of bit 0 of
parameter 15.06 RO forced data.
Bit 2 RO6
-1 = Force relay output 7 to value of bit 0 of
parameter 15.06 RO forced data.
Bit 3 RO7
1 = 1Allows the data value of a forced relay or digital
output to be changed from 0 to 3.
RO forced data15.06
-Force the value of this bit to RO4, if so defined in
parameter 15.05 RO force selection.
Bit 0 RO4
-Force the value of this bit to RO5, if so defined in
parameter 15.05 RO force selection.
Bit 1 RO5
-Force the value of this bit to RO6, if so defined in
parameter 15.05 RO force selection.
Bit 2 RO6
-Force the value of this bit to RO7, if so defined in
parameter 15.05 RO force selection.
Bit 3 RO7
260 BREL-01 relay output extension module