Def /
FbEq16/32
DescriptionName/ValueNo.
Not
energized
Selects a drive signal to be connected to relay
output RO4.
RO4 source15.07
0Output is not energized.Not energized
1Output is energized.Energized
…For the complete parameter list, refer to the drive firmware manual.
0.0 sDefines the activation delay for relay output RO4.RO4 ON delay15.08
10 = 1 sActivation delay for RO4.0.0 … 3000.0 s
0.0 sDefines the deactivation delay for relay output RO4.RO4 OFF delay15.09
10 = 1 sDeactivation delay for RO4.0.0 … 3000.0 s
Not
energized
Selects a drive signal to be connected to relay
output RO5.
RO5 source15.10
0Output is not energized.Not energized
1Output is energized.Energized
…For the complete parameter list, refer to the drive firmware manual.
0.0 sDefines the activation delay for relay output RO5.RO5 ON delay15.11
10 = 1 sActivation delay for RO5.0.0 … 3000.0 s
0.0 sDefines the deactivation delay for relay output RO5.RO5 OFF delay15.12
10 = 1 sDeactivation delay for RO5.0.0 … 3000.0 s
Not
energized
Selects a drive signal to be connected to relay
output RO6.
RO6 source15.13
0Output is not energized.Not energized
1Output is energized.Energized
…For the complete parameter list, refer to the drive firmware manual.
0.0 sDefines the activation delay for relay output RO6.RO6 ON delay15.14
10 = 1 sActivation delay for RO6.0.0 … 3000.0 s
0.0 sDefines the deactivation delay for relay output RO6.RO6 OFF delay15.15
10 = 1 sDeactivation delay for RO6.0.0 … 3000.0 s
Not
energized
Selects a drive signal to be connected to relay
output RO7.
RO7 source15.16
0Output is not energized.Not energized
1Output is energized.Energized
…For the complete parameter list, refer to the drive firmware manual.
BREL-01 relay output extension module 261
To Next Page
Loading...
