Start-up, control with I/O and ID run 19
Hints on using the basic control panel
Display
The control panel display shows the following elements:
1. Control location and related icons:
Indicates how the drive is controlled.
• Loc: The drive is in local control, that is, controlled
from the control panel.
• Rem: The drive is in remote control, that is,
controlled through I/O or fieldbus.
2. Rotation direction: Shows the forward (clockwise)
or reverse (counter-clockwise) rotation of motor.
3. Main: Navigates to the Main menu.
4. Option: Navigates to the Options menu.
5. Reference value: Allows to define the reference
value of speed, frequency or current and its unit
using the Up/Down arrow buttons.
6. Actual value: Shows the actual value of speed,
frequency or current and its unit.
1 – First start assistant guided settings:
Language, unit, and motor nominal values
Have the motor name plate data in hand.
Power up the drive.
Navigate to Main menu → Complete parameter list → parameter 96.01 and
select the desired language.
Press (OK).
Navigate to Main menu → Complete parameter list → parameter 96.16 and
change the unit, if needed.
Press (OK).
35.60
Hz
Loc
35.6 Hz
1
2
3
4
5
6
ACQ80 FW.book Page 19 Thursday, February 14, 2019 11:33 AM
To Next Page
Loading...
