ABB ACS150 - Page 19

Update notice
17
New parameter values (EN page 72)
Parameters
Index Name/Selection Description Def
99 START-UP DATA
Language selection. Definition of motor set-up data.
9902 APPLIC MACRO Selects the application macro. See chapter Application macros in ACS150
user’s manual (3AFE68576032 [EN]).
1 = ABB
STANDARD
USER S1 LOAD New value.
User 1 macro loaded into use. Before loading, check that the
saved parameter settings and the motor model are suitable for the
application.
0
USER S1 SAVE New value.
Save User 1 macro. Stores the current parameter settings and
the motor model.
-1
USER S2 LOAD New value.
User 2 macro loaded into use. Before loading, check that the
saved parameter settings and the motor model are suitable for the
application.
-2
USER S2 SAVE New value.
Save User 2 macro. Stores the current parameter settings and
the motor model.
-3
USER S3 LOAD New value.
User 3 macro loaded into use. Before loading, check that the
saved parameter settings and the motor model are suitable for the
application.
-4
USER S3 SAVE New value.
Save User 3 macro. Stores the current parameter settings and
the motor model.
-5