ABB ACS560 - Page 278

278 Parameters
34.72 Exception 1 start Defines the start date of the exception period in format
dd.mm, where dd is the number of the day and mm is the
number of the month.
The timer started on an exception day is always stopped at
23:59:59 even if it has duration left.
The same date can be configured to be holiday and workday.
The date is active if any of exception days are active.
1.1
- Start date of exception period 1.
34.73 Exception 1 length Defines the length of the exception period in days.
Exception period is handled the same as a number of
consecutive exception days.
0d
0…60 d Length of exception period 1. 1 = 1
34.74 Exception 2 start See 34.72 Exception 1 start.1.1
34.75 Exception 2 length See 34.73 Exception 1 length.0d
34.76 Exception 3 start See 34.72 Exception 1 start.1.1
34.77 Exception 3 length See 34.73 Exception 1 length.0d
34.78 Exception day 4 Defines the date of exception day 4. 1.1
- Start date of exception day 4.
The timer started on an exception day is always stopped at
23:59:59 even if it has duration left.
34.79 Exception day 5 See 34.79 Exception day 4.1.1
34.80 Exception day 6 See 34.79 Exception day 4.1.1
34.81 Exception day 7 See 34.79 Exception day 4 1.1
34.82 Exception day 8 See 34.79 Exception day 4.1.1
34.83 Exception day 9 See 34.79 Exception day 4.1.1
34.84 Exception day 10 See 34.79 Exception day 4.1.1
34.85 Exception day 11 See 34.79 Exception day 4.1.1
34.86 Exception day 12 See 34.79 Exception day 4.1.1
34.87 Exception day 13 See 34.79 Exception day 4.1.1
34.88 Exception day 14 See 34.79
Exception day 4.1.1
34.89 Exception day 15 See 34.79 Exception day 4.1.1
34.90 Exception day 16 See 34.79 Exception day 4.1.1
No. Name/Value Description Def/FbEq16