34 Operation principle and hardware description
D Swing-out frame
13 Main fuses for control devices, IP54 fan with option +B055, transformer with option +B055, V-
meter (option +G334), starter for auxiliary motor fan (option +M600)
14 Buffering module and power supply unit
15 Terminal blocks X18 and X19
16 Ground fault monitoring and safety circuit component
17 Optional extension adapters and modules
18 Thermistor and PT100 relays (options +L505, +L506)
19 Components and connection terminals for options +G300, +G301, +G307, +G313
20 “Door” fan
21 Door light relays
22 Drive control unit
23 Terminal block (X504, option +L504) for external control cable connections to the control unit
24 Main AC fuses
25 Main switch-disconnector (Q1)
26 Input cable connection terminals behind the shroud (bottom entry)
27 Motor cable connection terminals (bottom entry)
28 X250 terminal block
29 Input and motor cable and control cable entry (bottom entry and exit)
30 Drive module auxiliary cooling fan
13
14
15
16
17
18
19
20
21
22
23
D
30
24
27
29
26
25
28
To Next Page
Loading...
