Operation principle and hardware description 51
Cabinet equipment
G300 Cabinet and module heating elements (external supply)
G301 Cabinet lighting
G307 Terminals for connecting external control voltage (230 V AC or 115 V AC, eg. UPS)
G313 Output for motor heater (external supply)
G327 Ready light, white
G328 Run light, green
G329 Fault light, red
G330 Halogen-free wiring and materials
G334 V-meter with selector switch
G335 A-meter in one phase
G340
See section Additional wire markings (options +G340 and +G342) on page 45.
G342
Cabling
H350 Bottom entry
H351 Top entry
H352 Bottom exit
H353 Top exit
H358 Cable conduit entry (US/UK)
Fieldbus adapters
K451 FDNA-01 DeviceNet™ adapter module
K454 FPBA-01 PROFIBUS DP adapter module
K457 FCAN-01 CANopen adapter module
K458 FSCA-01 RS-485 adapter module
K462 FCNA-01 ControlNet™ adapter module
K469 FECA EtherCat adapter module
K470 FEPL EtherPOWERLINK adapter module
K473 FENA-11 Ethernet adapter module for EtherNet/IP™, Modbus TCP and PROFINET IO protocols
K475 FENA-21 Ethernet adapter module for EtherNet/IP™, Modbus TCP and PROFINET IO protocols,
2-port
I/O extensions and feedback interfaces
L500 FIO-11 analog I/O extension module
L501 FIO-01 digital I/O extension module
L502 FEN-31 HTL incremental encoder interface module
L503 FDCO-01 optical DDCS communication adapter module
L504 Additional I/O terminal block
L505 Thermistor relay (1 or 2 pcs)
L506 Pt100 relay (2, 3, 5 or 8 pcs)
L508 FDCO-02 optical DDCS communication adapter module
L513 ATEX-certified thermal protection with PTC sensors (1 or 2 pcs, +Q971 required)
L514 ATEX-certified thermal protection with Pt100 relays (3, 5 or 8 pcs, +Q971 required)
L515 FEA-03 I/O extension adapter module
L516 FEN-21 resolver interface module
L517 FEN-01 TTL incremental encoder interface module
L518 FEN-11 TTL absolute encoder interface module
L521 FSE-31 pulse encoder interface (+Q972 required)
CODE DESCRIPTION
To Next Page
Loading...
