Parameterization
114 FEX300, FEX500 OI/FEX300/FEX500-EN
Menu / Parameter Value range Description
Communication / FF The menu is displayed only for devices with
FOUNDATION Fieldbus.
Show FF Address Display only
Display of the FOUNDATION Fieldbus address. The
address is set via the FOUNDATION Fieldbus Master.
AI1-Q Flowrate Display only
Current flow in the selected unit from the Transducer
Block Flow, including status.
INT1-Q Flowrate Display only Current output value, with status.
AI2-Internal Tot Fwd Display only
Current totalizer status of the forward totalizer in the
selected unit from the Transducer Block Flow,
including status.
AI3-Internal Tot Rev Display only
Current totalizer status of the reverse totalizer in the
selected unit from the Transducer Block Flow,
including status.
AI4-Diagnostics Display only
Current output value, including status. The channel
can be selected via the bus, only.
AO-Density Adjust Display only
Current density output value from the Transducer
Block Flow, including status.
DI-Alarm Info Display only
Current output value, including status. The channel
can be selected via the bus, only.
DO-Cyclic Control Display only
Current function, including status. The channel can be
selected via the bus, only.
italics = Parameter can only be viewed at the "Advanced" password level.
1) Parameter / menu only available for FEP500 / FEH500.
To Next Page
Loading...
