ABB FSM4000 - Page 131

FSM4000 ELECTROMAGNETIC FLOWMETER | OI/FSM4000-EN REV. E 131
JIS B2210−10K wafer type
Nominal
diameter DN
Material
PN
TS
PS
[bar]
32
to 100
(1¼
to 4”)
1.4404
(316 L),
1.4435 (316 L),
1.4301 (304)
10
−
40 to 130 °C
(−40
to 266 °F)
10
Material load for flange design model SE21F
Liner: PFA
Figure 80: DIN flange, stainless steel 1.4571 (316 Ti) up to DN 100 (4”)
*) Higher temperatures are allowed for CIP/SIP cleaning for limited time
periods, see Table ‘Maximum permissible cleaning temperature’.
Figure 81: ASME flange, stainless steel 1.4571 (316 Ti) up to DN 100 (4”)
*) Higher temperatures are allowed for CIP/SIP cleaning for limited time
periods, see Table ‘Maximum permissible cleaning temperature’.
Material load for wafer type design model SE21W
Liner: PFA wafer type
A
PN 40/CL 300
B
PN 25
C
PN 16/CL 150
D
PN 10
Figure 82: Wafer type design model SE21W
*) Higher temperatures are allowed for CIP/SIP cleaning for limited time
periods, see Table ‘Maximum permissible cleaning temperature’.