FSM4000 ELECTROMAGNETIC FLOWMETER | OI/FSM4000-EN REV. E 55
Initiating the ENTER function when using the magnet
stick for operation
The ENTER function is initiated when the DATA/ENTER sensor is
activated for longer than 3 seconds. The display flashes to
indicate that the function is active.
There are two different methods of entering data:
• Numerical entry
• Entry from specified table
Note
When entering data, the values are checked for plausibility and, if
necessary, rejected with an appropriate message. In addition, in
the 3th and 4th line, the limit values (min/max) are displayed.
To Next Page
Loading...
