ABB FSM4000 - Parameter Descriptions

FSM4000 ELECTROMAGNETIC FLOWMETER | OI/FSM4000-EN REV. E 57
Parameter descriptions
Submenu / parameter
Value range
Remark
Prog.Level
“Locked”: All entries in the standard menus can be read
Disabled
Prog. level “Standard” menus are shaded in gray
Disabled
“Standard”: Menu with all menu items needed to operate the
device.
‘Specialist’: Specialist menu with all menu items accessible by the
customer.
“Service”: Additional service menus can be displayed by entering
the correct service code number (for ABB Service personnel only).
Prog. level
Standard
Prog. level
specialists
Prog. level
Service
Service code?
0
Prog. level
Prog. prot. code
Old PP code: 1 ... 9999 The Prog. Protection Code is normally ‘0’. If Prog. Protection is
selected, the question ‘New PP code?’ is displayed. If the user
enters an incorrect code between 1 ... 9999, a message
**Prog.Prot.** appears, indicating that the menu is locked and
requires the correct PP code. To suspend the PP-Code function,
you must access the ‘PP-Code’ menu. Select ENTER and you will
be asked for the old PP code. You must enter the correct old code
before the message ‘New PP-Code?’ is displayed. Enter a new
code or select ‘0’ to disable the PP-Code function.
0
New PP code
1 ... 9999
0