ABB FSM4000 - Design and Function; Overview

FSM4000 ELECTROMAGNETIC FLOWMETER | OI/FSM4000-EN REV. E 7
2 Design and function
Overview
Housing material
Alu. Housing, Series 4000
Stainless Steel Housing, Series 2000
Fixed Flange Fixed Flange Wafer type Variable Connections
1)
Welded spud
2)
Tri-clamp
3)
Pipe fitting
4)
Male thread
Sensor
Model number
SE41F SE21F SE21W SE21_*
Measured error
0.5% of rate (> DN 2)
DN PN DN PN DN PN DN PN *
Wafer type
— — 3 to 50
65 to 100
10 to 40
10 to 16
— — —
Flange DIN 2501/EN 1092−1
3 to 1000 10 to 40 3 to 100 10 to 40 — —
Flange ASME B16.5/B16.47
JIS B2210−10K
¹⁄₁₀ to 40”
¹⁄₁₀ to 12”
CL 150
CL 300
¹⁄₁₀” to 4” CL150 to
CL300/JIS
¹⁄₁₀” bis 2”
3” bis 4”
CL300/JIS
CL150/JIS
—
Pipe fitting
DIN 11851
— — 3 to 40
(¹⁄₁₀ to 1 ½”)
50, 80 (2”, 3”)
65, 100 (2 ½”, 4”)
40
16
10
S
S
S
Weld stubs DIN 11850
— — 3 to 40
(¹⁄₁₀ to 1 ½”)
50, 80 (2”, 3”)
65, 100 (2 ½”, 4”)
40
16
10
R
R
R
Welded spuds DIN 2463 / ISO
1127 — — 3 to 40
(¹⁄₁₀ to 1 ½”)
50, 80 (2”, 3”)
65, 100 (2 ½”, 4”)
40
16
10
Q/J
Q/J
Q/J
Weld stubs ISO 2037 / SMS
— — 25 to 40 (1 to 1 ½”)
50, 80 (2”, 3”)
65, 100 (2 ½”, 4”)
40
16
10
P/X
P/X
P/X
Tri
-clamp DIN 32676 / ASME BPE — — 3 to 50 (¹⁄₁₀ to 2”)
65, 100 (2 ½”, 4”)
16/10
10/10
T/K
T/K
External thread ISO 228 / DIN 2999
—
—
3 to 25 (¹⁄₁₀ bis 1”)
16
E
Liner
Hard/soft rubber,
ceramic carbide, PTFE,
PFA, ETFE, other
PFA (vacuum-tight) PFA, PFA vacuum-tight
Conductivity
≥ 20 µS/cm (optional ≥ 5/0.5 µS/cm)
Electrodes
Stainless steel 1.4571 (316 Ti), 1.4539 (904 L), Hastelloy B-3/C-4, platinum-iridium, tantalum, titanium
Process connection material
Steel,
stainless steel
— Stainless steel 1.4404 (316 L)
IP degree of protection in
accordance with EN
60529
IP 65 / IP 67 / IP 68 IP 65 / IP 67 / IP 68 IP 65 / IP 67 / IP 68
Measuring medium temperature
−25 to 130 °C / 180 °C
(−13 to 266 °F / 356 °F)
−25 to 130 °C
(−13 to 266 °F)
−40 to 130 °C
(−40 to 266 °F)
−25 to 130 °C
(−13 to 266 °F)