ABB FSM4000 - Page 8

8 FSM4000 ELECTROMAGNETIC FLOWMETER | OI/FSM4000-EN REV. E
… 2 Design and function
… Overview
Approvals
Model number
SE41F
SE21F
SE21W
SE21_*
Hygienic and sterile
requirements
— CIP/SIP capable 3A, CIP/SIP capable
Pressure Equipment Directive
97/23/EC
Conformity assessment in accordance with category III, fluid group 1
CRN (Canadian Reg. Number)
On request
Transmitter
Model number
S4
Power supply
85
to 253 V AC, 24 V AC/DC
Current output
0/2 to 10 mA, 0/4 to 20 mA
Pulse output
active (24 V), optocoupler (220 mA)
Ext. output switch-off
yes
Ext. totalizer reset
yes
Forward / reverse flow
measurement
yes
Communication
HART® protocol, PROFIBUS PA®, FOUNDATION Fieldbus®
Pipe empty detection std.
yes, DN 10 or higher and ≥ 20 µS/cm
Self
-monitoring, extended
diagnosis functions
yes, extended diagnostic functions / fingerprint only in connection with sensors SE21, SE21F
and SE41F for DN 10 or higher
Local display / totalization
yes
Density correction
yes, manual entry (totalize and display in mass units)
IP rating in
accordance with EN
60529
IP
65 / IP 67, NEMA 4X
Chassis
Field mount housing