ABB FSO-21 - System Description; Required Components; Tools

196 PROFIsafe
It is possible to use the shared device feature together with an FPNO-21 module. For
further information, see FPNO-21 PROFINET adapter module user's manual
(3AXD50000158614 [English]).
For more information on PROFIsafe and PROFINET, see www.profibus.com
.
System description
 Required components
• FSO-21 safety functions module
• ACS880 Primary control program: version 2.12 or later / DCS880 Firmware
version 2.07 or later
• FB module: FPNO-21 PROFINET fieldbus adapter module (version 1.00 or later)
or FENA-21 Ethernet adapter module (version 3.05 or later)
• compatible safety PLC system, for example, ABB AC500-S Safety PLC or
Siemens SIMATIC Fail-safe S7 PLC
 Tools
• Drive composer pro: version 1.7 or later
• For ABB PLCs: Automation builder: 1.0 or later (includes PS501 Control Builder
Plus version 2.3.0), safety license PS501-S
• For Siemens PLCs: SIMATIC Step 7 V5.5 + S7 Distributed Safety V5.4 and
SIMATIC Step 7 V 11 (TIA Portal) + Step 7 Safety Advanced V 13