ABB FSO-21 - Start-up; Safety considerations

Start-up 455
12
Start-up
Contents of this chapter
This chapter describes the general precautions to be taken before starting up the
safety system for the first time.
Safety considerations
The start-up must be done by a qualified electrical professional who has appropriate
knowledge on functional, machine and process safety. The safety instructions must
be followed during the start-up. See the drive and the safety component specific
safety instructions in the individual product manuals.
WARNING! Until all the safety functionality is validated, the system must not
be considered safe.
Note: The safety of the machine users must be ensured in each phase of the
application life cycle (for example, commissioning, start-up, maintenance, etc.).