ABB FSO-21 - Page 30

30 Introduction to the manual
The PROFIsafe certificate for the FSO-21 module is attached below.
Certificate
PROFIBUS Nutzerorganisation e.V. grants to
ABB Oy
Hiomotie 13, 00380 Helsinki, Finland
the Certificate No: Z20147 for the PROFIsafe Module:
Model Name: FSO-21
Order-Number: 3AXD50000012090
Revision: SW: V4.3.0; HW: 1
Application CRC: Channel A: 0x63F41365
Channel B: 0xB630A569
This certificate confirms that the product has successfully passed the certification tests
with the following PROFIsafe scope:
3
PROFIsafe_V2 functionality on PROFINET IO
Test Report Number: PS087-3
Authorized Test Laboratory: SIEMENS AG, Fürth, Germany
The tests were executed in accordance with the following documents:
“PROFIsafe - Test Specification for F-Slaves, F-Devices, and F-Hosts, Version 2.1, March 2007”.
This certificate is granted according to the document:
“Framework for testing and certification of PROFIBUS and PROFINET products”.
For all products that are placed in circulation by June 22, 2023 the certificate is valid for life.
Karlsruhe, August 06, 2020
_____________________________
(Official in Charge)
Board of PROFIBUS Nutzerorganisation e. V.
_____________________________
(Karsten Schneider)
_____________________________
(Dr. Jörg Hähniche)