ABB IRB 120 - Introduction to safety information

1 Safety
1.1 Introduction to safety information
Overview
The safety information in this manual is divided into the following categories:
• General safety aspects, important to attend to before performing any service
work on the robot. These are applicable for all service work and are found
in General safety information on page 18.
• Safety signals and symbols shown in the manual and on the robot, warning
for different types of dangers, are found in Safety signals and symbols on
page 38.
• Specific safety information, pointed out in the procedures. How to avoid and
eliminate the danger is either described directly in the procedure, or in specific
instructions in the section Safety related instructions on page 46.
Product manual - IRB 120 17
3HAC035728-001 Revision: N
© Copyright 2009-2017 ABB. All rights reserved.
1 Safety
1.1 Introduction to safety information